Care Instructions: JAUNT

Supplies: 

jaunt twig ceramic pipe
  • Zip-lock bag
  • Isopropyl alcohol
  • *If you're cleaning a bong, you'll also need a cling film and rubber bands. 

Stem, Twig, or Branch Pipes:

1) Scrape out any debris from the bowl with a pointy tool. 

2) Place the pipe in a zip-lock bag. Pour enough isopropyl alcohol to submerge the pipe, and add in a couple of tablespoons of coarse salt. 

3) Seal the bag with contents vigorously until all the gunk is removed. 

4) Rinse the pipe thoroughly under warm water, making sure the cleaning solution is completely flushed out from inside. 

5) Remove any stubborn particles with a pipe cleaner or cotton swab dipped in isopropyl alcohol, making sure to rinse again afterwards. 

6) Repeat as necessary. 

Bough Bong:

1) Remove bowl from the bong and remove the silicone gasket. 

jaunt bough ceramic bong mint

2) Place the bowl in zip-lock bag. Pour enough isopropyl alcohol to submerge the bowl, and add in a couple of tablespoons of coarse salt. 

3) Seal the bag with contents vigorously until all the gunk is removed. 

4) Rinse the bowl thoroughly under warm water, making sure the cleaning solution is completely flushed out from inside. 

5) Remove any stubborn particles with a pipe cleaner or cotton swab dipped in isopropyl alcohol, making sure to rinse again afterwards. Repeat as necessary. 

6) Fill the body of the bong with isopropyl alcohol (as much as you'd normally fill it with water) and a few tablespoons of coarse salt. 

7) Cover the two openings tightly and cling film, and secure the film with rubber bands so it won't leak. 

8) Shake and swirl the liquid inside the bong until all gunk is removed. 

9) Rinse the bong thoroughly under warm water, making sure the cleaning solution is completely flushed out from inside. 

 

* TIP: We recommend emptying and rinsing your bong after each session. Dirty water promotes buildup and funks up the flavor of your flower.